1/5

TD30E Reversierbares Düsen-Brushless-Unterwasser-Triebwerk – 30 kg Schub, 24–50 V, integrierter ESC für SUP

$500.00 USD ~~$590.00 USD~~

Auf Lager

We are the OEM ODM manufacturer. For bulk orders and custom solutions, please contact us at official@hobbywater.com

Yes. TD30E supports continuous use with a 50.4V (12S) battery.

For continuous operation at 100% throttle, we recommend limiting it to about 1 hour.

If it's intermittent use (stop-and-go), it can run for several hours — the main concern is heat buildup.If you need truly continuous running, For example, if you need 1000W continuous, you'd need a motor rated 2000W+ running at 1000W — that way it can run continuously without overheating.

Der TD30 Unterwasser-Thruster ist ein leistungsstarker Unterwassermotor aus Metall, der für Elektroboote, Fischereifahrzeuge, Rettungsausrüstung und ROVs entwickelt wurde. Er ist auf Spitzenleistung ausgelegt und bietet folgende Eigenschaften:

Robuste Bauweise: Hergestellt aus Metall in Luft- und Raumfahrtqualität mit Präzisionsbearbeitung für Langlebigkeit.
Vollständig wasserdicht: Entwickelt, um vollständig wasserdicht und resistent gegen Staub, Schmutz und Korrosion zu sein, um eine lange Lebensdauer unter Wasser zu gewährleisten.
Verlängerte Motorlebensdauer: Hochpräzisionslager zur Maximierung der Lebensdauer.
Optimierte Effizienz: Ausgestattet mit einem hochfesten Kompositpropeller für beste Effizienz.
Einfache Installation: Modulares Design für schnelle Montage zur Erfüllung verschiedener Anforderungen.

Umgebung: Salzwasser/Süßwasser

Die Halterung ist im Lieferumfang enthalten, Größe: 21cm*7.8cm

Spezifikationen:

Leistung: 1900W
KV: 85
Maximaler Schub: 30kg vorwärts, 20kg rückwärts
Tauchtiefe: Bis zu 100m
Größe: 271mm x 123mm
Kabellänge: 150cm (anpassbar)

ESC-Parameter:

Spannungsbereich: Nicht über 12S
Dauerstrom sollte 40A nicht überschreiten
PWM-Eingangsimpulsbreite: 1000-1500-2000us (1500 ist Stopp)
PWM-Frequenz: 50Hz

Dieser Thruster ist ideal für alle, die eine zuverlässige und effiziente Unterwasserantrieb in anspruchsvollen Umgebungen benötigen.

Wichtiger Hinweis zur Ausrichtung des Thrusters

Der TD30E verfügt über ein umgekehrtes Düsendesign — der Propeller sollte nach vorne (weg von der Montagehalterung) zeigen. Dies unterscheidet sich von den meisten Thruster, bei denen der Propeller nach hinten zeigt.

Eine rückwärts gerichtete Montage des Propellers verringert die Leistung erheblich und kann zu Belüftungsproblemen führen.

1. For Your Safety:

Keep Clear: Never put hands, feet, or anything near the propeller when it's plugged in. It can spin without warning and cause injury.
No Water, No Power: Do not run the thruster in air for more than 10 seconds. It needs water to cool itself or it will break.

2. For The Thruster's Safety:

Check Seals: Always check that the rubber O-rings are clean, greased, and undamaged before putting it in water.
Avoid Debris: Keep it away from weeds, sand, and plastic bags. These can jam and break the propeller.
No Regular Glue: Do not use normal threadlocker (screw glue) on any screws. It will crack the plastic body. Only use a kind that is safe for polycarbonate.

3. Simple Rules:

Test First: Always test in a bucket or pool before going to open water.
Rinse After Use: Always rinse with fresh water after use, especially in saltwater.
Store Safely: Keep it in a case to protect it from bumps and dust.

1. Two Propeller Types:

You get two propellers: one labeled "CW" (spins clockwise) and one labeled "CCW" (spins counterclockwise).

2. How Thrust Works:

Forward Thrust (Recommended):A CW propeller pushes best when spinning clockwise.A CCW propeller pushes best when spinning counterclockwise.✅ Use this for maximum power and efficiency.
Reverse Thrust:Both can also spin the opposite way to push backwards.⚠️ This works but is weaker and less efficient.

Quick Tip: Always check the label (CW/CCW) to make sure you have the right propeller installed for the direction you want to go. For the strongest push, use forward thrust.

The Thruster: The main unit, which contains a brushless DC motor.

Power Source: A battery pack or power supply.
A Controller: Something to tell it how fast and which way to spin (e.g., a remote control).

How to Connect It:

If your thruster has a built-in ESC:
You can often connect it directly to a standard PWM receiver.
Important Note on Power:
If your receiver or ESC does not have a BEC (Built-in Eliminator Circuit) to power itself, you will need to add a separate BEC module. This provides the necessary power for the electronics.

It's normal for our thrusters to be loud.They use plastic bushings, so small movements between parts can cause sound. This noise is greatly reduced underwater, as water lubricates and cools the system.Never run them dry for more than a few seconds—it can permanently damage the bearings. Every thruster is tested to work properly.

TD30E Series — Built-in ESC Brushless Underwater Thruster

Black anodized metal. Built to perform.

TD30E with Standard Bracket

TD30E with Dual Hose Clamps — Fully Waterproof

TD30E with Simple Bracket & Reverse Duct Cover

TD30E FOC Built-in ESC with Simple Bracket

TD30E with Standard Bracket & Nylon Nozzle

TD30E with SUP Bracket & Reverse Duct Cover

TD30E FOC with Standard Bracket

TD30E with Simple Bracket

The TD30E series features a fully black anodized metal finish — clean, rugged and premium to the touch. A wide range of configurations is available, including built-in ESC and external ESC versions, as well as pump-jet models. Customization is supported.

Contact us: official@hobbywater.com